Showing posts with label Procedures and Devices. Show all posts
Showing posts with label Procedures and Devices. Show all posts

Friday, May 23, 2008

Coping With Home Infusion Therapy

Home IV therapy for some is much more comfortable than continuing treatment as a hospital inpatient. However, it's not without its own set of frustrations and difficulties. Many cystic fibrosis patients are well-seasoned professionals when it comes to managing the schedule of home IV therapy; for the newly diagnosed or parents who are learning the home IV routine for the first time, it can all be a bit overwhelming. This article is written with the first-timers in mind in hopes that it will allay your fears and give you the confidence you need to cope with this new aspect of managing this aspect of life with cystic fibrosis.



Click here to read the full article which includes information about:

Thursday, May 15, 2008

Mixed Messages: When the Sweat Test Is Negative but the Symptoms Look Like CF

The sweat test used to be the gold standard for determining whether a person has cystic fibrosis. With the advent of more definitive diagnostic procedures such as pre-implantation, prenatal and newborn screening for cystic fibrosis, getting a correct diagnosis is far easier than it used to be.

But what happens when you or your child still exhibits symptoms that are common to cystic fibrosis? How do you determine whether to keep pushing for more genetic testing to confirm CF, or whether it’s time for you and your doctor to start looking at other possibilities?

Here are the most common diseases that present with symptoms very similar to cystic fibrosis:

Shwachman-Diamond Syndrome (www.shwachman-diamond.org)

Diagnosed by: blood test or genetic test

  • failure to thrive
  • feeding problems
  • recurrent infections
  • slow growth
  • Diarrhea with fatty, oily loose stools
  • Blood clotting problems (similar to vitamin K deficiency in cystic fibrosis)
  • Enlarged liver
  • Diabetes mellitus
  • Abnormal pulmonary function test

Celiac Disease (www.celiac.org)

Diagnosed by: 1) celiac blood panel 2) duodenal biopsy and biopsy of multiple locations in the small intestine 3) observed response to gluten free diet

  • Recurring bloating, gas or abdominal pain
  • Chronic diarrhea or constipation or both
  • Unexplained weight loss
  • Pale, foul-smelling stool
  • Anemia
  • Vitamin K deficiency
  • Fatigue
  • Failure to Thrive (infants)
  • Male infertility

Primary Ciliary Diskinesia

Diagnosed by: biopsy of lung or sinus tissue

  • Chronic sinusitis
  • Bronchiectasis
  • Susceptibility to pneumonia and lung infections
  • Male infertility

Alpha-1 Antitrypsin Deficiency

Diagnosed by: simple blood test

  • Impaired liver function
  • Recurrent lung infections
  • Airway inflammation
  • Hemoptysis
  • Swollen abdomen due to enlarged liver
  • Wheezing and shortness of breath
  • Chronic cough
  • Bronchiectasis

Tuesday, May 13, 2008

What is BiPAP?

BiPAP stands for Bi-level Positive Airway Pressure. It is a breathing apparatus that helps people get more air into their lungs. The airways are kept open using a BiPAP machine. BiPAP machines are adjusted to dual settings so that the pressure of the air coming in on inspiration can be different from the pressure of the air being exhaled. This is beneficial because it allows the patient to get more air in and out of the lungs without having to exert a lot of muscle energy.

A person’s forced vital capacity (FVC) as determined by a Pulmonary Function Test is largely what determines if a BiPAP machine is necessary. BiPAP is often used for people who have experienced pneumothorax (or collapsed lung) and as a result have loss of ability of the air sacs at the outermost portions of the lungs.

BiPAPs are usually used while a person is sleeping. It is used for conditions other than just cystic fibrosis. Sleep apnea sufferers for example, are often fitted with a BiPAP machine and face mask. Unlike supplemental oxygen, BiPAP masks are worn so that they completely enclose the mouth and nose. Most manufacturers of BiPAP face masks have different models available and all are designed to be as comfortable as possible.

Friday, March 21, 2008

How To Be a Good Patient

Doctors, nurses and respiratory therapists agree that when it comes to being a good patient, individuals who have cystic fibrosis tend to lead the pack. Although they develop some of their “patient personality” largely out of necessity, there’s no question about their ability to face the challenge of CF with every ounce of dedication and diligence they have to give.

Good patients typically embody the following qualities:

  1. Actively involved
  2. Self-awareness
  3. Inquisitiveness
  4. Willingness to learn
  5. Compliant

-Active Involvement-

Being actively involved in your own health care is just one of many ways to take back some control in what is largely uncontrollable. You may not be able to avoid catching a bacteria or virus from the world at large, but you can be proactive in remedying it. A patient who is actively involved in their care understands the importance of making appointments in advance even when they don’t feel particularly sick. They know that managing CF requires ongoing monitoring of their status, particularly when it comes to charting the results of pulmonary function tests (PFTs) and sputum cultures. An actively involved patient understands the value of “an ounce of prevention.”

Good patients who are actively involved in what their doctors are doing, often bring along a supportive friend or family member to their clinic appointments. A second set of ears to hear what the doctors have to say is a good way to make sure you don’t miss anything important or new. Active involvement may also involve bringing a notebook to each appointment to record the doctor’s instructions and recommendations. Making lists of questions for the doctor ahead of time, as well as a list of any medications that need refills are things that good patients do to stay on top of things.

-Self-Awareness-

Similar to being actively involved in your health care program, you must be self-aware. By learning what constitutes your particular “base line” or “status quo” you will be more adept at recognizing when things are starting to decline. For example, if your cough is usually dry and tight but starts to become wetter and more productive, you get on the phone to schedule an appointment at the CF Clinic.

Another aspect of self-awareness is that you have a healthy attitude about your limitations because of CF. You are able to live life to the fullest, but do so without exhausting yourself or putting yourself in harm’s way. A good patient who is self-aware knows how to set appropriate boundaries to keep friends and even family from pressuring you into giving too much of yourself.

Patients who are self-aware are honest with their doctors about the non-physical aspects of life with CF. They understand that the emotional burden that comes with having a chronic condition like CF is sometimes too much for one person to bear. A good patient asks for help when they feel overwhelmed.

-Inquisitiveness-

Good patients ask questions and expect answers. They ask medical professionals about any new treatments or medications they’ve heard about or read about online. An inquisitive nature not only helps a CF patient understand his or her own body, but enables them to gain clearer understanding of what the doctors are doing and why.

An inquisitive patient does not assume that s/he has all the answers. Patients who are inquisitive don’t assume that everything they read on the Internet about CF is true or applicable to their individual situations. They bring their questions to the professionals and ask for clarification. They respect the doctor’s expertise and training, and ask questions about things they don’t understand. A good patient is not afraid to ask a doctor to explain things more than once. After all, cystic fibrosis has so many facets, it’s unreasonable to expect to learn it all in a short clinic appointment.

-Willingness to Learn-

When a doctor recommends a new course of treatment or a new therapy, a good patient is willing to learn to adapt. Instead of refusing to try something unfamiliar, they give it a fair chance before making a final decision. For example, if your doctor recommends that it’s time to get a port-a-cath instead of a PICC line, a good patient will be willing to learn why this is so. Similarly, if a patient is diagnosed with cystic fibrosis related diabetes (CFRD), the willingness to learn how to manage the new condition should override any desire to complain or become depressed at the news.

Although there is certainly a time and a place for complaining and “venting” about the struggle of life with CF, a patient with a healthy outlook and willingness to learn will be able to successfully balance it all with a bit of help. Patients who are willing to learn are not afraid to step outside their comfort zones and learn how to let other people help them with things.

-Compliant-

Rarely are cystic fibrosis patients 100% compliant with all their treatments and medications, though there are some who set the bar quite high! Compliant patients stand a much greater chance of finding a sense of peace and acceptance of their disease. Patients who are compliant can rest assured to know that they are doing everything within their power to make their lives as full and beautiful as possible, even with CF.

Doctors appreciate their patients who are compliant, because it makes their jobs a bit easier. For example, if a patient is compliant to take their enzymes as directed suddenly begins to have a change in their bowel movements, the doctor will know that either the diet has changed or the enzymes are no longer effective at that particular strength. Less time is wasted in trying to find an appropriate solution.

Compliant patients keep their appointments. They understand the need for preventive care in treating cystic fibrosis, and they take every opportunity to monitor their health.

Managing life with cystic fibrosis can be tough, but it doesn’t need to be overwhelming and depressing. If you work on being a good patient, chances are you’ll cope with the disease much better.

Friday, January 25, 2008

Therapies that Use Positive Expiratory Pressure (PEP)

Cystic fibrosis patients have difficulty clearing the mucus from their lungs not only because the mucus itself is so sticky, but because the airways are inflamed or otherwise tightened. Inflammation may be from bronchiectasis, bacterial infection, allergies or pneumonia. Clearing the airways is much better accomplished when the bronchi are less inflamed and constricted.

Therapies involving Positive Expiratory Pressure (PEP) are designed to keep the airways opened when the patient breathes out. There are a few different PEP devices, each having their own limitations and benefits. The way that PEP therapy works is that it keeps the lungs inflated with air. Basic science tells us that two things cannot occupy the same space. In people with cystic fibrosis, the mucus occupies precious space in the airways, preventing them from taking a full, deep breath.

PEP devices are either stand-alone, or can be used with a nebulizer. All PEP devices work by having a one way valve that creates resistance when the patient breathes out against it. With PEP therapy, the pressure difference that occurs when a patient breathes out allows the lungs to fill with additional air, which in turn will push the mucus out as the lungs try to return to an equilibrant volume.

In simpler terms, PEP therapy functions very similarly to trying to get mustard out of a squeeze bottle. If you were to just squeeze the bottle without shaking it, you would only get a puff of air, and that little bit of watery mustard (which I call a “musquirt”.) When you shake the bottle, you move the amount of air in the bottle to the bottom, which will force the mustard out when you squeeze.

PEP therapy is very effective when combined with postural drainage. However, the postural drainage positions, especially the ones in which a patient must lie face down, may make breathing against a PEP device too difficult. Some PEP therapies combine vibratory pressure, which helps loosen the mucus and dislodge it from the linings of the airways. The Flutter ®, Acapella ® and the Quake ® use a combination of vibrations and PEP to promote airway clearance.

Below are some pictures of different types of PEP therapy:

1) PEP mask





2) Acapella





3) Flutter







4) Quake




5) PEP attachment with nebulizer

Thursday, January 24, 2008

Postural Drainage and Chest Physiotherapy

From mist tents to vibrating air-filled vests, the world of airway clearance therapy for cystic fibrosis patients has undergone many changes over the last few decades. Their underlying goal is the same: stimulate the lungs to move as much sticky mucus out of the airways as possible. Patients with cystic fibrosis who are old enough to remember the “olden days” of chest physiotherapy (CPT) are excited about the latest advancements, but wish they had come so much sooner. Some respiratory therapists and CF patients themselves, still insist on utilizing the more archaic therapies, mostly because of familiarity and routine. Newer medical technology is of course, expensive, and the high cost of obtaining certain airway clearance devices poses a distinct barrier to patients in need. This next few articles outline the various types of mainstream CPT methods over the years.


Postural Drainage and CPT


Also called bronchial drainage, this refers to the positions that use of gravity to aid in the mucus clearance. In order to be effective, the head must be lower than the chest. This allows the mucus to flow toward the trachea, where it can be more easily coughed out. Different postures are useful for targeting different regions in the lungs. These 6 positions are to be used in a systematic manner, working from the upper to the lower lobes. There are a total of 9 regions that can be drained in this manner. Achieving the correct positions can be done using a tilt table, a positional hospital bed, or pillows.


Postural drainage is most effective when combined with chest percussions and vibrations. This is called CPT. It has also been called “clapping” or “thumping.” In years past, the caregiver administering CPT did so by cupping his or her hand, and beating on patient’s back in each of the regions of the lungs. Its effectiveness was almost solely determined by technique. Improper cupping of the hand produced only a slapping sensation, painful to both patient and caregiver. Also, as fatigue set in, the steady, rhythmic pounding would slow down and lose intensity.

To ensure a more uniform cupping, a small rubber device was developed that could be easily gripped by the caregiver. The device looked like the paddles used for air hockey, but had a hollowed out bottom which functioned in the same manner as cupping the hands.

The “clapping method” of CPT, is no longer in widespread use for adults having CF. Certain aspects of postural drainage, however, are still useful for infants. Instead of clapping, however, the caregiver instead taps with two fingers on the different lung regions, while holding the child in the different postural drainage positions.

In place of clapping, which as mentioned before was sometimes fatiguing, a motorized massage/percussion tool is used. Respiratory therapists in hospitals use a professional model, such as the GK3 Postural Drainage and Percussion Massagers (see image below).

The product, which looks quite similar to a car buffer, is available for home use, but costs anywhere from $1,300 to $1700.

Sunday, December 16, 2007

Bronchodilators and Nebulized Medications


"Recurrent wheeze and breathlessness are common in people with cystic fibrosis, and bronchodilators are commonly prescribed," according to lead author Clare Halfhide, M.D., of the Royal Liverpool Children's Hospital in England. "Despite their wide-scale and often long-term use, there is limited objective evidence about their efficacy in cystic fibrosis."

Source: Center for Advancement in Health. Article "Little Evidence Behind Bronchodilator Therapy For Cystic Fibrosis"


The findings of that study were published in October, 2005. It is the most current information I can find on the topic. Dozens of health-related news media ran the article, so I'm confident that it's not just a hack study published by some entity with a hidden agenda.

I used to do CPT without a bronchodilator unless my asthma was acting up or I'm fighting infection. Now that I have a ThAIRapy Vest from Respirtech, I always take a puff of my Xopenex HFA inhaler before starting my airway clearance regimen. Xopenex is very similar to albuterol. It is a bronchodilator. Many patients find that Xopenex does not make them as jittery or anxious as albuterol does.

I also use bronchodilators both as a "rescue med" and as part of my preventive maintenance even if I don't do them at the same time as CPT. Bronchodilators are most effective when they are done first in the lineup of "usuals." Below is the proper order of med-neb treatments, as reported by another CF patient's clinic's recommendation:

1. Bronchodilator (albuterol or xopenex)

2. Mucolytics (pulmozyme THEN hypertonic saline)

3. Inhaled antibiotic (TOBI or colistin)

4. Long acting bronchodilator (serevent or foradil)

5. Inhaled steroid (flovent, advair, or pulmicort)


Here's why the order of operations is so important when managing CF.

The bronchodilator helps open up the airways. The more open the airways, the better the chances of inhaling the other medications deeply enough into the lungs where they can be most effective. Mucolytics are "mucus cutting" medications. They help break up the secretions so that they can be coughed up more easily. In CF patients, the mucus and the lungs are typically dry, which is why hypertonic saline is so useful. Hypertonic saline works by adding moisture to the lining of the lungs, resulting in a slippery surface conducive coughing out sputum. Following sputum clearance of the airways, the lungs are further able to take in the nebulized mist of the antibiotics. At this point there is a greater likelihood of the antibiotics taking hold in both small and large airways. The treatment concludes with inhaled steroids which help keep the airways open for an extended period of time (i.e. 8-12 hours when it is time for another treatment.)

The length of time to complete all these steps varies somewhat depending on the type of nebulizer/compressor system being used. Before I had a PARI eFlow to nebulize my tobramycin antibiotic, the process took approximately an hour. Also, when I was not feeling well, or was more congested or taking TOBI, it used to take me as long as 1-1/2 hours to complete the process. Now that I have an eFlow, the process is dramatically faster and takes 45 minutes or less.

Although the article I cited at the beginning of this post says that bronchodilators are shown to be ineffective treatment, bronchodilators used in tandem with the other treatments CF patients need are effective indeed. My opinion is that they are an important piece of the overall treatment. While they may be ineffective on their own, they should not be discounted altogether.

Tuesday, September 4, 2007

Blood Work: Understanding BUN and Creatinine

In order to determine kidney function, a blood test called the BUN Creatinine is performed. BUN stands for blood urine nitrogen. It measures how much urea is present in the bloodstream. High levels of urea indicate that the kidneys are having trouble filtering it out. The most noticeable effect of impaired kidney function is a marked decrease in the output of urine. This is a sign of dehydration.

Cystic fibrosis (CF) patients are prone to dehydration due to the abnormal function of the cystic fibrosis trans-membrane regulator (CFTR) protein. This is primarily what causes the characteristically salty sweat in people with CF. Dehydration and the loss of electrolytes during sweating can wreak havoc on the kidneys. When this happens, the imbalance of electrolytes can result in a buildup of nitrogen in the blood that is caused by a buildup of urea in the body.

Urea is a molecule comprised of carbon, oxygen, nitrogen and hydrogen in the formula CH4N2O. This chemical is released into the bloodstream by the liver as the body breaks down proteins. In healthy kidneys, urea is removed from the blood, and passes easily into the urine. When kidney function is impaired, a buildup of urea occurs.

A normal BUN level is usually in the range of 10 to 20 milligrams per deciliter (mg/dL). It is just as important to prevent the BUN from being too high as it is from it falling below the normal range.

Possible Causes of high BUN

  • High protein diets
  • Certain medications such as tobramycin
  • Dehydration
  • Heart failure
  • Presence of Addison’s disease
  • Blockage of urinary tract due to kidney stones
  • Intestinal bleeding

Possible Causes of low BUN

  • Liver disease
  • Malnutrition
  • Low protein diet (common in vegetarians and vegans)
  • Severe muscle injury
  • Pregnancy

Typically, a BUN level is measured at the same time as a creatinine measurement. Creatine (note spelling) is a protein that generally remains at a consistent level in the bloodstream. It’s made in the liver, then serves as the energy source when muscles are used. As the breakdown of muscles takes place, the waste product creatinine is formed and is then filtered through the kidneys. By comparing the amount of BUN and creatinine, the doctor can determine whether kidney function is normal or impaired. A normal ratio of BUN:creatinine is anywhere in the range of 10:1 to 20:1.

Patients with CF, particularly those who have pancreatic insufficiency, tend to be malnourished. This can result in lower BUN/Creatinine ratios. As mentioned before about the levels of urea, the BUN/Creatinine ratio can be elevated due to dehydration. In general men have higher BUN than women. The BUN level also increases naturally with age.

Blood work for the purpose of monitoring BUN/Creatinine is done every other day throughout the course of intravenous antibiotics. This is to ensure that the concentration of the prescribed medication is not so high that it compromises the patient’s kidney function. It is important for patients undergoing IV therapy to remain adequately hydrated in order to maintain normal and healthy kidney function.

Sunday, September 2, 2007

Types of Airway Clearance Devices

Cystic fibrosis patients have abnormally thick, stick mucus that is difficult to remove from their airways. In order to prevent infection a combination of medications and airway clearance techniques are used. In the past, the methods of airway clearance we cumbersome, time consuming, and, at times, downright uncomfortable for both patient and care giver. One such example is the "clapping" technique. Sometimes referred to as "beatments" or "thumps" by CF sufferers, the process involved having a caretaker cup his or her hands and physically beat the patient's back in a rhythmic manner. By clapping each section of the lung's lobes, the mucus was dislodged to a point that it could be coughed up and spit out.

Over the last decade many developments have been made in the world of airway clearance devices that make expelling the mucus much easier. Although some patients do still prefer the clapping methods to which they have grown accustomed, newcomers to the disease have many options for airway clearance.

Intrapulmonary Percussive Ventilator (IPV)

This device, available in some hospitals and often called the "Percussion Air" stimulates the airways by directing several bursts of air into the lungs at a predetermined rate. A pneumatic flow interuptor sends a pulsing flow of air at a rate of 100-300 blasts or "cycles" per minute. The device is attached to a special mouthpiece and nebulizer cup so that the patient can benefit from medication simultaneously with the percussion treatment. Due to the high frequencies at which the air pulses, some patients have difficultly tolerating such a method. However, great benefits exist for those who have good posture and have been properly instructed in the technique of using and IPV.

The Flutter(r) Mucous Clearance Device

The Flutter is a small, handheld device that creates positive expiratory pressure (PEP) in order to stimulate the lungs to vibrate or "flutter" enough to dislodge the sticky mucous. The device itself consists of a weighted metal ball resting in a cone that sits atop a diaphragm through which air can flow. When the patient exhales, the cone and ball move around creating the "fluttering" motion that results in PEP. This causes pressure in the airways, keeping them open longer than would happen just through simple tidal breathing. The cap on the end of the device can be twisted to different settings to make the pressure lesser or greater depending on the patient's ability.The range of benefit of the Flutter depends largely on the patient's ability to exhale against the device. Longer, sustained breaths and the use of a technique called "huff coughing" are the best ways to benefit from using the Flutter.

Acapella (tm)

Similar to the Flutter, the Acapella employs the use of positive expiratory pressure. This device is considerably larger than the Flutter, but has a greater range of resistance than can be "dialed in" on one end. One advantage of the Acapella is that the t-piece of a nebulizer can be attached to it, allowing the patient to inhale medication while also engaging in airway clearance. The only drawback is that many home nebulizer-compressor systems do not deliver a high flow rate through the nebulizer cup. This results in wasted medication and decreased benefit for the user. In the hospital setting, however, the air flow can be adjusted to a rate that is high enough to push the medication through the device and reach the mouthpiece, ultimately benefiting the patient. Most often, the Acapella is used independently of nebulizer treatment.

Vests

The most favored and beneficial airway clearance device used by CF patients is the Vest. Different models are available from different companies, and determining which one to use is left to personal preference. The vest works by using a method called high frequency chest compression. The Vest is inflatable, and is connected to a compressor by two air hoses. Once switched on, the vest fills with air, and the air begins to oscillate, thereby loosening the mucus. The frequency (measures in Hertz) and Pressure (psi) can be adjusted according to the needs of the individual. Some patients wear their Vests while exercising, or while inhaling aerosolized medication. The technique of "huff coughing" is also applied while a patient is undergoing a vest treatment. Huff coughing is a type of deep exhalation that enables the airways to stay open longer. It's similar to how a person would breathe if they wanted to see their breath in the cold air, or breathe fog onto a window. When breathing in this way during a vest treatment, it's easier for the patient to cough up the mucous that is being dislodged.

---
Additional Resources:

American Thoracic Society List of Airway Clearance Devices (includes Insurance and Cost Information for Acquiring Them)

How To Huff Cough Effectively

Respirtech inCourage vest


The Flutter Valve (From Axcan Pharma)

Hill-Rom Vest

Acapella PEP Therapy

Percussionaire Company

Tuesday, July 31, 2007

Nocturnal Oxygen Desaturation (Personal Experience)


One of the ways doctors can tell if a pulmonary exacerbation is occurring, is to monitor the oxygen saturation in the blood. A device called a pulse oximeter is used to calculate how much of the blood is oxygenated. A pulse oximeter works by sending two different wavelengths (i.e. colors) of light from a probe through a person's fingertip. The device then calculates how much of each color of light is absorbed, and compares the two. The result is a ratio of oxygenated hemoglobin to arterial blood. The ratio is expressed as a percentage.

The expected healthy range is 96-100%. It is important to remember that this percentage fluctuate in the course of a day, so there is no reason for concern if the numbers dip ever so slightly. However, if desaturation, or, oximeter readings of less than 90% occur frequently and persistently, a doctor may recommend having an overnight pulse oximetry study done.

It is not uncommon for people with a chronic respiratory disease, like cystic fibrosis, to experience what is called nocturnal oxygen desaturation (NOD). Symptoms of NOD include morning headaches, restless sleep, poor sleep due to difficulty in breathing. Researchers have also seen that desaturation is more likely to occur in patients who have moderate to severe lung damage as indicated by FEV1.

My lung function had been lower than usual and I was hospitalized a number of times in the last 12 months. I wanted to keep better track of my own vital signs at home, so I purchased a small pulse oximeter. I took readings from it first thing each morning, and prior to my nebulized medications in the evening. I began to notice that my percentage was hovering around 93% for days at a time. Occasionally in the evenings it would drop down to 88% or lower. Although it didn't stay that low, it was notable enough for me to bring it to the attention of my doctor. My doctor ordered an overnight pulse oximetry study. Overnight oxygenation studies are usually done when sleep apnea is suspected, or when there is a potential need for supplemental oxygen.

The nice part about the study is that I was able to do it in the comfort and privacy of my own own. Unfortunately, the first night I tried the test, the device was so uncomfortable that I never really fell into a deep enough sleep to get accurate "sleep study" results. The finger sensor was quite tight and kept causing me to lose feeling in my fingertip. I told my doctor that the results of that night's test were likely to be inaccurate, since I never truly fell completely asleep.

A week later I was given the device again. This time I had a more comfortable device and slept pretty well with it. As I lay in bed watching the digital display, one of the last numbers I remembered seeing was 85%.

The technician who brought the pulse oximeter to my home told me that to get a good amount of data, I should try to get at least 6 hours worth logged in. I think I got in at least 7. Since it was the weekend and I wouldn't have to return the oximeter until Monday, I went ahead and wore it for an additional night, just to make sure there was enough data to review. By that time I had become a pro at sleeping with the sensor clipped to my index finger.

My doctor had the results at my latest appointment. The computer interprets all the logged data and calculates how much of the time I was in the "safe zone" and how many times and for how long I dropped into desaturation. Desaturation is what happens when there is some sort of pulmonary obstruction (such as decreased lung function in cystic fibrosis) causing the blood to be lower in oxygenated hemoglobin than it should.

My test results showed that 99 percent of the time I was in the safe zone. The safe zone is considered 90-95%. Healthy is 96-100%. It was determined that I do not need supplemental oxygen at this time.



For More Information

Nocturnal Ventilatory Support for CF Patients
Pulse Oximetry (Wikipedia definition)
Home Measurement of Oxygen Saturation in CF Patients
NOD and Spirometry in CF

Friday, July 6, 2007

Blood Draws: Hemoglobin A1c


One of the blood tests that helps determine the concentration of glucose (blood sugar) in the body is the hemoglobin a1c. This test goes by a variety of names including HbA1c, glycated hemoglobin, or glycosylated hemoglobin. It is usually part of the annually scheduled lab tests for patients with cystic fibrosis or cystic fibrosis related diabetes (CFRD).

Red blood cells (RBCs) have a life span of up to 180 days. The lab technician calculates how much sugar is "sticking" to the RBCs obtained from a blood draw. The results of the test tell the doctor the average concentration of glucose in the bloodstream over the last two to three months.
How the Sugar Sticks to Hemoglobin

Hemoglobin are proteins whose function is to carry oxygen in the blood. As these proteins move throughout the body, they inevitably will come into contact with glucose. The glucose can bind to the hemoglobin A, which is a specific and prevalent type of hemoglobin. When bonding occurs, the hemoglobin is said to be glycosylated. Naturally, when there is more glucose in the blood, more of the sugar will bind to the hemoglobin.

Think of it as putting a spoonful of sugar into a bowl of Cheerios. The more sugar you sprinkle in, the greater number of granules will likely land on each individual "O."

What is the test like?

There are two ways the blood sample can be obtained. One is by accessing the patient's vein and drawing the blood into a test tube. The other is by using a lancet--sometimes called a finger stick--to pierce the skin on the tip of a finger and squeeze out a small amount of blood. If other blood work is being done at the same time, venipuncture is the most likely method of retrieval. If the HbA1c is being done in conjunction with a fasting Oral Glucose Tolerance Test, a small puncture may be all that's required.

Most HbA1c tests are conducted in a laboratory, but home tests are also available by prescription. There is some debate as to whether the two are equally accurate. The home test may not be available to every one depending on their individual health care coverage.

Interpreting the Results

The results of the HbA1c test are expressed as percentage points. Each percent corresponds to a concentration of blood sugar equal to 30mg/dL (1.67 mmol/L). A person with normal, steady levels of glucose in their blood will have a HbA1c equal to 6%. This is equivalent to 135mg/dL or 7.5mmol/L. As blood sugar levels increase, so does the measured percentage. Levels between 6% and 6.5% are acceptably normal. Someone with impaired glucose tolerance or CFRD may have a test result of greater than 8%.

It is not uncommon for a person with impaired glucose tolerance to have slightly elevated HbA1c levels during periods of illness or infection.

Related Links

Diabetes Screening
The Difference Between CFRD and Type I Diabetes
Abnormal Glucose Tolerance in CF
Diagnosing CFRD

Thursday, June 28, 2007

Diabetes Screening

An Oral Glucose Tolerance Test (OGTT) is one of the tests that the Cystic Fibrosis Foundation recommends be performed yearly for people age 14 and up. OGTT is ordered when impaired glucose tolerance, hyperglycemia, hypoglycemia, or cystic fibrosis related diabetes (CFRD) is suspected.

Early detection of diabetes helps reduce the likelihood of developing complications of the disease. Signs and symptoms of diabetes may include:

  • extreme thirst
  • frequent urination, especially at night
  • unexplained weight loss
  • fatigue and listlessness
  • vision changes
  • infections or sores that heal too slowly

Similarly, hypoglycemia (low blood sugar) can also have complications for cystic fibrosis patients. Symptoms may include:

  • sweating
  • extreme hunger
  • shakiness, hand tremors
  • confusion or inability to concentrate
  • blurry vision
  • calling out in sleep

The procedure requires that the patient fast for 8 to 10 hours the night before the test. An initial blood sample is taken to determine the blood sugar level in a fasting state. Then the patient is given a liquid to drink that has a specific concentration of sugar in it. This is called a “glucose challenge” or “glucose loading.” The glucose challenge drink is extremely sweet, but is usually flavored and chilled to make it taste better.

The patient must then wait 2 hours before having more blood drawn. During this time no food or drink is to be ingested. This ensures an accurate result in the blood test.

Interpreting the results

Fasting

  • Normal: 70-99 mg/dL (3.9 to 5.5.mmol/L)
  • Impaired Fasting Glucose: 100-125 mg/dL (5.6 to 6.9mmol/L)
  • Diabetes: 126 mg/dL and above (7.0mmol/L)

2-hour fasting OGTT

  • Normal: >140mg/dL (7.8 mmol/L)
  • Impaired Glucose Tolerance: 140-200 mg/dL (7.8 to 11.1 mmol/L)
  • Diabetes: >200 mg/dL

Tuesday, June 26, 2007

DEXA Scans


Over the last decade, CF researchers and physicians have observed that as patients with CF age, their metabolic rate (i.e. how much energy the body uses) changes are disease severity increases. Malabsorption issues are closely linked with poor performance on pulmonary function tests. It is of utmost importance that CF patients and their clinics work hard to maintain adequate nutritional status.

People with cystic fibrosis, especially those who are diagnosed as having pancreatic insufficiency, have great difficulty absorbing vital minerals and nutrients from food. Doctors regularly prescribe vitamin and mineral supplements for CF patients with the expectation and hope that semi-normal levels of these can be attained in the body.

Without sufficient concentrations of certain vitamins and minerals in the body, a patient with CF may develop bone density problems. As the number of patients exhibiting weak bones has increased, there is an added emphasis being placed on the necessity of what are called DEXA scans.

DEXA (dual energy x-ray absorptiometry) scans should be performed every three years to measure bone mineral density.

The procedure of a DEXA scan is painless and simple. The patient lies on his/her back on an examination table under a scanner arm. The scanner then uses x-ray beams from two different directions to the patient’s body. The energy from the x-rays travels at a particular frequency, and is transmitted to a receiver that determines how quickly it moved through the bone. It does this by counting photons, which are energy particles. In places where the bone is denser, the x-ray beam slows down. By measuring these rates of transmission, overall bone density is calculated.

A computer takes the information about the number of photons and compares it to a normal, expected value. The result is called a “T” score. Different T scores can tell a doctor whether a patient is at risk for developing osteoporosis, or is perhaps exhibiting osteopenia.

The entire DEXA scan procedure only takes 4 minutes to scan the entire body. Since the test is performed annually, the CF team can identify problems with mineral density and work with a patient to take preventive measures to prevent bone loss. Calcium supplements with D vitamins added are commonly prescribed. Vitamin D, which is a fat soluble vitamin, is directly responsible for how much calcium comprises the bones in the body.

Many people have heard of osteoporosis, but osteopenia is not as commonly known. Osteopenia is when a person's bones are less dense than normal. Eventually it could lead to osteoporosis. Typically people who develop this condition are much older and are likely to be post-menopausal women. Bone density losses take place more frequently as people age. However, people with CF are likely to be diagnoses with osteopenia or osteoporosis at younger ages.. Without sufficient vitamin D and calcium to build strong bones, the risk of developing osteoporosis or osteopenia increases.

Other things that can help a patient safeguard his/herself against future problems with bone mineralization includes the following:

  • eat a diet rich in calcium and vitamin D
  • limit caffeine intake
  • limit alcohol consumption
  • do weight-bearing exercise like running, walking, or hiking (basically anything that forces my body to work against gravity)
  • take care of mental health issues so that they don't adversely affect physical health
  • sit in the sun for about 15 minutes per day to give the body the opportunity to make its own vitamin D

For more information please visit the following links:

Nutritional Problems in CF
Post-Transplant Osteoporosis in CF
Prepubertal Bone Mineral Accretion
Study of Benefits of Growth Hormone for CF

Wednesday, June 20, 2007

What To Expect when Having a PICC Line Placed


PICC stands for “peripherally inserted central catheter.” It is a long tube inserted into the arm and used for intravenous antibiotic therapy.. The tubing that goes into the patients arm is threaded into a very large vein, which connects it to the right side of the heart. By delivering medication so close to the heart, it gets pumped through the body more efficiently.

PICC lines are often used in CF patients because they can last much longer than traditional IV needles. When properly cared for, they can last weeks, or even months. The flexible tubing of the PICC line enables a patient to continue with most normal activities.

Inserting a PICC line is a longer and more difficult process than starting a regular IV. It must be done by a specially trained radiologist, nurse, or other medical professional. The most important part of placing a PICC line is to verify that the tip rests in the correct position near the heart.

The process of inserting a PICC line is as follows:

1. The length of the PICC to be inserted is determined by measuring the distance from the crook of the elbow to the heart.

2. A trained medical professional preps the site (usually the inside elbow of the left arm) with disinfectant.

3. The patient may receive local anesthesia by injection or application of a cream at the site of insertion

4. A small needle is inserted into a large vein in the inside elbow of the left arm.

5. A wire is placed through the needle, then the needle is removed. A special tube called an “introducer sheath” is placed over the wire. This makes sure that the puncture in the arm is large enough for the PICC line.

5. The PICC line and introducer sheath are fed into the appropriate vein over the wire. Threading stops when the total length inserted matches the length that was measured at the beginning of the procedure.

6. The introducer sheath and wire are removed.

7. The line is capped with a cannula or septum that will be the site of infusion. To verify that the line is in the vein, it is flushed via syringe with 3-5cc of normal saline. The syringe is then used to check for blood return.

8. A chest x-ray is done to confirm that the line is placed in the correct position.

9. The line is flushed with heparin, to prevent clotting in the line.

FAQ about PICC lines:

  1. Can I shower/bathe with it?

Yes, but it needs to be protected as much as possible to keep moisture out of the dressing.

  1. Can I do normal activities with it?

A PICC line should be handled with care. No vigorous activities (such as sports or heavy lifting) should be done within the first 72 hours after receiving a PICC line.

  1. How do I care for the PICC line?

The Cystic Fibrosis Foundation has a PDF available with information about how to care for a PICC line

  1. Does it hurt?

Initially, there is a some discomfort from the procedure of having the catheter inserted. Within a day or two, it will feel better. Most often the discomfort is caused by the dressing irritating the skin around the site.

  1. How long can a PICC line last?

CF patients who have intravenous therapy courses lasting 10-30 days are well suited by a PICC line. Although PICCs cannot be used for extremely long terms (like a portacath) they can last up to 6 months.

  1. How is the PICC line removed?

The catheter is removed by simply taking off the dressing, then pulling the catheter out. Pressure is then applied to the site to reduce bleeding. A bandage can be used to cover it while it heals.


----

For more information please visit the following links:

CFF.org PICC Info

PICC line Wikipedia





Thursday, June 14, 2007

Sensitivity Testing and Antibiotics


Sputum cultures are done frequently for CF patients. A sputum sample is obtained by coughing phlegm into a specimen cup. The patient’s name, the current date and time that the sample was given are recorded on cup’s label. The doctor will then fill out a lab slip, which indicates which tests are to be performed on the sample.

The first round of testing merely determines whether bacteria are present in the sample. A small amount of the sputum is spread across a Petri dish that is filled with a substance called agar gel. Agar gel is essentially “food” for bacteria. If in fact there are indeed microorganisms present in the sputum sample, then they will grow rapidly in the Petri dish thanks to all the food available to them. Sometimes the appearance of bacteria growth is seen within 24 hours, other times it may take a week for any growth to appear. When the lab technician observes bacterial growth, the sample is said to be “positive.”


People with CF will almost always have a positive sample. It is important not only to verify that bacteria or fungus are present in the sample, but which species. In order to identify the microorganism(s) in the sputum, the lab is instructed to carry out something called “sensitivity testing.”


Gram Stains


Before sensitivity testing can be done, the types of bacteria present in the sample need to be determined. This involves a process called “gram staining.” Gram staining (which was invented by Hans Gram in 1884) involves applying a tincture to a collection of the bacteria sample on a microscope plate.

The structure of the cell wall of the bacteria being analyzed determines whether it’s a gram negative or gram positive sample. Bacteria that are gram positive have a compound in their cell walls called peptidoglycan which will turn dark purple when the stain is applied.

Bacteria without peptidoglycan in their cell walls are said to be gram-negative. This is because their appearance will remain unchanged when the stain is applied. Gram-negative bacteria generally have a secondary membrane layer and lipopolysaccharide which act as a protective covering around the cell, preventing the stain from penetrating it.

Sensitivity Testing

Once a bacterium has been identified as either gram positive or gram negative, sensitivity testing is then done to see which type of antibiotics will kill the infection. Lab tests have been streamlined in order to find the most common solutions first. There are different classes of antibiotics that work on any number of infections. The following list shows the classes of bacteria, the class of antibiotic that will target it, and examples of the species of bacteria that may be present in the sample.

Gram negative bacteria

-Pseudomonas aeruginosa

-Cepacia

-Legionella

-Haemophilus influenzae (ear, lung infections)

-Salmonella

-Shigella

-Klebsiella (pneumonia)

-E.Coli (diarrhea)

Sensitivities may indicate using: Amoxycillin, Augmentin, Erythromycin, Gentamicin, Kanamycin, Meropenem, Tobramycin, Cipro, Azithromycin

Pharmacologists have observed that in treating gram-negative bacteria, combination therapy (i.e. prescribing multiple antibiotics at once) is more effective than using just one. The synergistic effects that result from the combination of drugs has been successfully demonstrated.

Gram-positive

-Staph aureus (Toxic Shock Syndrome)

-Streptoccocus

-Listeria

-Bacillus anthracis (Anthrax)

-TB

-Botulism

Sensitivities may indicate using: Kflex, Cephalexin, Augmentin, Amoxicillin, Vancomycin, Cipro

When CF patients experience a pulmonary exacerbation (i.e. worsening of symptoms) the culprit is usually a bacterium that has been cultured before. In order to save time and get the patient started on a course of antibiotics as soon as possible, the doctor may prescribe a drug that has widespread use. Ciprofloxacin for example, is a broad-spectrum antibiotic that is effective against many infections that are common to CF patients. It is used to treat gram-negative and gram-positive bacteria. Once the results of the sensitivity testing comes back, the doctor may then prescribe a different antibiotic that will target the identified infection.

Tuesday, June 5, 2007

Creatinine


Creatinine is a product that forms when creatine phosphate, a component of muscle tissue, is broken down. As this creatinine builds up in the blood, it is filtered into the urine by the kidneys. If the kidney function has been impaired by strong medications, creatinine levels will increase in the blood, due to decreased excretion of creatinine in the urine.

One of the lab tests that CF patients should have done every year is a creatinine blood test. The results of the test will show how well the kidneys are functioning. This is important to monitor, especially for patients who are frequently prescribed antibiotics.

Normal levels fall in the range of 0.8 to 1.4 mg/dl.

In people with CF, high concentrations of creatinine can be attributed to dehydration, or kidney failure. Cephalosporins and aminoglycosides are types of antibiotics that are typically prescribed for CF patients. These medications are known to be nephrotoxic (i.e. harmful to kidneys) and can result in high creatinine levels.

Friday, May 25, 2007

How Spirometry Works

The world of cystic fibrosis is full of technical terminology and abbreviations. One such abbreviation is PFTs which stands for pulmonary function tests. PFTs are of critical importance in helping the CF team keep track of the progression of lung disease in CF patients. PFTs are typically administered by a respiratory therapist either in the clinical setting or during in-patient hospitalization.

This test checks the volumes and flow rates the patient is capable of producing by forcing (blowing) air out of their lungs into a mouthpiece. The test results can be compared at each visit to determine if lung function is staying the same, improving, or getting worse. A nose clip is used to keep air from coming out of the nose, so all the air goes into the mouthpiece. Three consistent forced expirations are required for a good test. A respiratory therapist in the pulmonary lab area will coach and encourage the patient during the test to get the best effort.

The Basics of Spirometry

The most common test used to evaluate how well the lungs are functioning is spirometry. Specifically, spirometry measures how quickly air moves in and out of the lungs. The patient breathes into an apparatus called a spirometer. The spirometer is connected to a computer, which uses a special program to measure the volume and speed of air.

A spirometer uses a disposable mouthpiece attached to a tube, which in turn, is connected to a variety of electronic sensors. In order to carry out the test, the patient must sit up straight, feet flat against the floor and head facing forward. The mouthpiece and tube is then positioned directly in front of the patient at a comfortable height. The patient is then given a pair of soft nose clips to ensure that all inhalation and exhalation occurs only via the mouth.

Spirometry is more than just breathing into a tube. In order to give the computer good data (i.e. repeatable and detectable) the patient must follow a specific breathing technique. This begins with what is referred to as “tidal” breathing. Basically this is just relaxed breathing that is not too shallow or too deep. The patient takes steady, evenly spaced breaths for a few moments. This gives the computer program time to recognize the individual’s breathing pattern.

When the respiratory technician gives the signal, the patient must breathe in quite deeply then exhale forcefully and quickly. The goal is to empty the lungs as much as possible in the first second of breathing out. This results in the measurements of Forces Vital Capacity (FVC) and Forced Expiratory Volume (FEV). Together these give a good indication as to the overall health of the lungs. The amount of air exhaled in the first second, is called FEV1. This is the value the respiratory technician and the doctor look at the most in cystic fibrosis.

Breathing Technique

Taking the deep breath in can be difficult, especially for someone who is experiencing respiratory distress, or other complications. The key to breathing deeply is to focus on filling the lungs completely. By using the lower abdominal muscles, the diaphragm is stretched and more air can enter the lungs.

It is important for the patient to resist the urge to raise his or her shoulders upon inhalation. This is especially difficult for asthmatic patients or those with severe congestion, as they are accustomed to feeling relief by holding their posture in such a way. However, this is not conducive to deep breathing.

What Do Spirometry Results Tell Us?

Spirometry results are displayed on a spirograph. An example of this is in the picture below. In addition to the graphical representation of the results, a table listing different numerical values or calculations is included. They are:

Force vital capacity (FVC): a measure of how much air the patient can exhale with force immediately following a deep breath in.

Forced expiratory volume (FEV): the measure of the amount of air that can be exhaled forcefully in one breath. FEV is measured at 1 (FEV1) second, 2 (FEV2) seconds, or 3 (FEV3) seconds. In the case of CF, FEV1 is most commonly used to diagnose the progression of the disease.

Forced expiratory flow (FEF)25% to 75%: these values give a measure of the amount of flow halfway through the exhaled breath.

Peak expiratory flow (PEF): In the past, pediatricians only used peak flow (determined by a simple hand held device called a peak-flow meter) to gauge breathlessness. Although this measurement gives a good indication of how quickly a patient can exhale, it is not very useful in determining whether the small airways or the larger airways are constricted.

Measures of capacity and volume are expressed as liters (L). All measurements of flow are expressed as liters per minute (L/min).

What Does the Doctor Do With the Results?

Everyone will experience a loss of lung function over time. People with CF lose it at a much quicker rate than their healthy peers. By keeping track of spirometry results, the respiratory therapist and CF specialist can determine the rate of progression of lung disease. By identifying problems early, severe damage can possibly be averted.

For example, if a patient who typically has an FEV1 of 2.7 Liters suddenly drops to 2.1Liters, this may indicate the presence of infection. Based on that assumption, the doctor may immediately prescribe anti-inflammatory medication, request a sputum sample to look for infection, or order a chest x-ray to get a better look at what’s going on in the patient’s lungs.

Some doctors are very proactive about preventive antibiotics. As such, patients who exhibit a dramatic decrease in FEV1 in a short period of time may find themselves hospitalized immediately. When a patient’s baseline pulmonary status decreases by 10%, the patient is said to be experiencing an exacerbation requiring treatment.

How often is spirometry done?

Patients admitted to the hospital perform PFT’s soon after admission and usually several more times before going home (depending on the length of stay in the hospital). This is one way to evaluate how well a patient is improving during the hospital stay and decide when they are well enough to go home.

Different clinics and hospital have their own guidelines for frequency of spirometry. Regular spirometry is an important component of aggressive treatment for cystic fibrosis. The American Thoracic Society has determined how often spirometry should be done. Unfortunately, people with CF who receive their care at facilities other than at an accredited CF Clinic, may not be having their spirometry measured frequently enough.

The Cystic Fibrosis Foundation recommends that adults should have spirometry done at each clinic visit. Pediatric patients need only be monitored every 3 to 6 months.

Can I Do Spirometry at Home?


Yes! Although you will not generate the same type of in-depth results as a formal spirometry study conducted at your CF Clinic, you can monitor your own peak flow and FEV1 levels in the privacy and comfort of your own home. There are a few different commercially available products, which are linked below.



Home-use Spirometers and Software to track FEV1

Thursday, May 17, 2007

Product Review: The Quake

For cystic fibrosis patients, dislodging the sticky mucous in the lung is key to preventing infection.

The Quake ®, a portable, easy-to-use, hand-held airway clearance device. It uses positive expiratory pressure (PEP) as a means to loosen mucous. The Quake accomplishes this in a unique way. Unlike competitors' products, The Quake's design promotes greater "pressure pulses. In other words, the airways vibrate to a much steadier and stronger degree. When used with steady, tidal breathing (i.e. "regular" breathing) pressure pulses are at a maximum. This means that the lungs are benefiting from the pressure during inhalation and exhalation.

The Quake can be used standing up, sitting down, hanging upside down and even when curled up on the floor in the fetal position. And yes, I actually conducted tests in each of those positions. This feature makes it a more versatile device than competing products such as the Acapella or the Flutter.

There are no predetermined settings that need to be "dialed in" on the Quake. Anyone, regardless of peak flow or FEV1 status has the lung power to make the device work. With a deep breath or a shallow one, the PEP stimulates the airways. The design of The Quake is such that the patient receives benefit when breathing in as well as out.

The device is extremely light weight and compact. It's easy to hold and the crank has a comfort grip.

And that brings me to the downside of The Quake. In order to use the device, you must have both hands free. It looks a bit like a fishing reel. The makers of The Quake say that by this active involvement of the part of the patient, the treatment is more effective. Multitasking is not an option with this little thing.

As with any airway clearance device, deciding which is best is a matter of personal preference. I am not immediately impressed by it, but I'll give it a week of good effort before I dismiss it completely.

Tuesday, May 15, 2007

How a Bronchoscopy Works

A bronchoscopy or "bronch" as it is often referred to by patients, is a procedure performed by a pulmonologist when a closer look of the airways and lungs is needed. This helps the doctor determine the progression of lung disease. Brochoscopies are useful for finding infection or physical problems within the lungs or airways.


A bronchoscopy consists of inserting a long, thin tube (usually through the nose) through the upper airway into the lungs. The physician can look at the surface of the lungs and take sputum specimens. This test may help find an infection or other lung problem. A CF patient may never need a bronchoscopy. It is performed only when a problem persists that cannot be identified by other means.


There are two types of broncoscopies: flexible and rigid. In both, the patient is sedated, though to differing degrees. For a flexible bronch, the doctor first sprays the patient's throat with a numbing medication. This makes the procedure more bearable and less irritating to the throat. A long thin piece of tubing, approximately 1/2 inch wide and 2 feet long is inserted via the nose, and down through the patient's windpipe (trachea.)



Once the tube has been properly inserted and is far enough into the lungs, the doctor will fill the tube with a solution of salt water. As the saline solution fills the air sacs, material that is present in the lungs is flushed out. This can be collected for further analysis by a laboratory.

When a rigid bronch is performed, the patient is sedated more completely using a medication like Versed. Sometimes the purpose of a bronchoscopy is to obtain a sample of the lung tissue. In such cases, a tiny forceps is threaded through the tube down into the lungs, and a tiny piece of tissue is pulled out.

For more information,